更新時間：2022-04-08
文章來源：http://gulfbaader.com/
閱讀量：22
智能會議系統現在廣泛應用于企業中，但是不乏對其操作方面不了解的，容易出現一些問題，那么智能會議系統會有什么故障要預防？下面我們一起來看看吧。
Intelligent conference system is now widely used in enterprises, but there is no lack of understanding of its operation, which is prone to some problems. Then what faults should be prevented in intelligent conference system? Let's take a look.
智能會議系統音響系統喇叭出現雜音或嘯叫：麥克電池電量不足或功放音量調得過大容易產生雜音，建議用戶先更換麥克電池或適當降低功放的音量。麥克離喇叭過近或正對喇叭容易產生嘯叫，請調整麥克與喇叭之間的距離和角度；功放音量過大也會產生嘯叫，可調低功放音量試試。
The speaker of the intelligent meeting system is noisy or squeals: The battery of the microphone is low or the volume of the power amplifier is too high. Replace the battery of the microphone or lower the volume of the power amplifier. If the microphone is too close to the speaker or directly facing the speaker, it is easy to scream. Please adjust the distance and Angle between the microphone and the speaker. The result amplifier volume is too big also can produce scream, can lower the result amplifier volume to try.
智能會議系統音響系統麥克無聲：檢查麥克電池是否沒電了；無線麥克接收機是否加電；接收機與調音臺之間的連線是否連接或松動。
Intelligent conference system Sound system Mike silent: check whether the battery of the mike is dead; Whether the wireless microphone receiver is powered up; Whether the cable between the receiver and the mixer is connected or loose.
智能會議系統音響系統喇叭不響：檢查功放是否開機或?yàn)槠涔╇姷牟遄欠窦与?。用戶往往在關閉系統時將設備的電源也一起關閉。假如功放打開了，檢查是否將系統靜音，或?qū)⒐Ψ挪シ诺囊袅空{(diào)得太低，以于喇叭無聲或播放的音量小。如功放打開了，音量也調了，喇叭仍無聲音，則檢查調音臺是否電源關閉。
Intelligent conference system The speaker of the audio system does not sound: Check whether the power amplifier is turned on or whether the socket that supplies power to it is powered on. Users often turn off the power of the device when shutting down the system. If the amplifier is turned on, check whether the system is muted, or the volume of the amplifier is set too low, so that the speaker is silent or the volume of the amplifier is low. If the power amplifier is turned on and the volume is adjusted, but the speaker still has no sound, check whether the mixer is powered off.
燈光照明控制系統無法開啟照明或無法關閉照明燈：KT-8繼電器內的模塊不吸合或不斷開。如果只是偶爾出現該現象，那么可以輕微敲擊繼電器內的模塊使其吸合或斷開。如果經常出現，則通知維護人員到現場檢查。
The lighting control system cannot turn on the lighting or turn off the lighting: the module in the KT-8 relay does not close or keeps turning on. If this happens only occasionally, the module in the relay can be gently tapped to pull or disconnect it. If it occurs frequently, inform maintenance personnel to check it on site.
燈光照明控制系統無法調節照明燈的亮度：智能會議系統中的燈光照明控制系統無法調節照明燈的亮度，通知維護人員到現場檢查。
The lighting control system fails to adjust the brightness of the floodlights: The lighting control system in the intelligent meeting system fails to adjust the brightness of the floodlights. Therefore, maintenance personnel are notified to check the floodlights onsite.
智能會議系統會有什么故障要預防？實際上除了以上的問題，還有很多方面要去預防，如果您覺得自己解決不了，要盡快找的維修人員來維修才是。更多內容了解就來我們網站
gulfbaader.com咨詢吧。
What failures should be prevented in the intelligent meeting system? In fact, in addition to the above problems, there are many aspects to prevent, if you feel that you can not solve, to find professional maintenance personnel to repair as soon as possible. For more information, please visit our website gulfbaader.com for consultation.
魯公網安備 37010202002516號
