更新時間:2022-10-27
文章來源:http://gulfbaader.com/
閱讀量:22
音響為我們的生活增添了許多歡樂和享受,實際上掌握正確的使用方法和適當?shù)膶?duì)音響進行保養能夠增加音響的使用壽命。下面小編來為大家介紹怎樣才能正確的使用和保養
山東音響。
The stereo has added a lot of joy and enjoyment to our life. In fact, mastering the correct use method and proper maintenance of the stereo can increase the service life of the stereo. Here is a small compilation to introduce how to use and maintain Shandong professional audio correctly.
音響使用時應注意事項:
Precautions when using the stereo:
1、音響使用時的溫度,避免在高溫、寒冷和潮濕的地方使用。音響的工作環境溫度應為5攝氏度到40攝氏度之間,相對濕度為35—80%。
1. The temperature at which the stereo is used should not be used in high temperature, cold and damp places. The working environment temperature of the stereo shall be between 5 ℃ and 40 ℃, and the relative humidity shall be 35-80%.
2、音響使用中的防塵,組合音響不要放在灰塵過多的地方。音響中許多機械零件和電子元件(如唱頭、唱針、磁頭、激光頭等)都要求有一定的精度和清潔度,將影響音響的音質,甚對零件起破壞性作用。
2. The audio shall be dustproof during use. The combination audio shall not be placed in a place with too much dust. Many mechanical parts and electronic components (such as phonograph head, stylus, magnetic head, laser head, etc.) in the sound system require a certain degree of accuracy and cleanliness, which will affect the sound quality of the sound system and even play a destructive role in the parts.
3、音響使用時的防磁,避免在強磁場附近使用,音響中許多工作過程中電信號與磁信號之間的轉換,如果音響附近有強磁場存在,肯定會影響組合音響的正常工作,產生電磁感應雜聲及交流聲。
3. The sound shall be antimagnetic when used. Avoid using the sound near a strong magnetic field. In many working processes of the sound, the conversion between electrical signals and magnetic signals. If there is a strong magnetic field near the sound, the normal operation of the combined sound will be affected, and electromagnetic induction noise and alternating sound will be generated.

音響的保養方法:
Maintenance method of the stereo:
1、箱體好選原木制造的,擺放位置應該在干燥的房間里,盡可能地避免陽光的直接照射,千萬不要放在潮濕的地方,防止高密度機制板遇潮而澎脹。
1. The box should be made of logs. It should be placed in a dry room to avoid direct sunlight as much as possible. It should not be placed in a damp place to prevent high-density machine made boards from swelling when they are wet.
2、音響喇叭單元體的保養:將成品箱中喇叭單元細心拆下,一定要小心,并在箱體和喇叭上用油性筆做好位置記號,以便保養好后復位安裝。
2. Maintenance of the loudspeaker unit: carefully remove the loudspeaker unit in the finished box, be careful, and make position marks on the box and the loudspeaker with an oil pen, so as to reset and install after maintenance.
準備一盒進口白色固體車臘(進口企業轎車上用的)均勻地抹在磁鋼上下二層T鐵上,一般此T鐵均為鐵制鍍鋅品,如果盆架是鐵盆架也須這樣處理,讓臘就附在上面,不要把它擦掉,可防止N年不被銹蝕。
Prepare a box of imported white solid car wax (used on imported brand cars) and evenly smear it on the two layers of T iron above and below the magnetic steel. Generally, the T iron is made of iron galvanized products. If the basin frame is an iron basin frame, it must also be treated in this way, so that the wax can be attached to it. Do not wipe it off to prevent it from being rusted for N years.
喇叭單元從音卷引接線端的二根拋物線狀的編織軟銅線上,也須涂上臘,并用手指來回弄均勻,也不要把它擦掉,以防止時間長了,該引線發黑變得彈性減小而影響工作。
The horn unit shall also be coated with wax on the two parabolic braided soft copper wires led from the voice coil to the terminal, and shall be evened back and forth with fingers, and shall not be wiped off to prevent the wire from blackening and becoming less elastic and affecting the work after a long time.
此外音箱不要長期擱置不用,每月少要用1-3次,每次用一小時以上,對音響進行定量,以免出現不必要的麻煩,否則會帶來很多的麻煩,輕則影響正常工作,重則影響它的壽命。關注我們
http://gulfbaader.com,帶您了解更多關于音響的事項!
In addition, the speaker should not be left unused for a long time. It should be used at least 1-3 times a month for more than an hour each time. The speaker should be activated quantitatively to avoid unnecessary trouble, or it will cause a lot of trouble, ranging from affecting normal work to affecting its life. Follow us http://gulfbaader.com , let you know more about audio!